How Much Does It Cost To Start A Brewery? $620K CAPEX Plan
Based on the researched assumptions, it costs about $620,000 in brewery CAPEX before working capital, licensing delays, deposits, and operating runway The larger funding need is closer to $715,000 in this model because cash bottoms out around Month 13, just before breakeven in Month 14 The biggest cost items are the $150,000 10 BBL brewhouse system, $120,000 canning line, $100,000 taproom buildout, and $80,000 fermentation tanks Treat these as planning assumptions, not vendor quotes, because batch size, facility condition, taproom scope, and packaging strategy can move the budget fast
Estimate Startup Costs with Calculator
Startup CAPEX Calculator
Estimates capitalized startup assets only for a brewery launch, including production gear, taproom build-out, packaging equipment, vehicle, lab gear, and contingency.
!
What's excluded This calculator excludes inventory, opening stock, payroll runway, debt service, rent deposits, licenses and permits, marketing runway, working capital, and other operating expenses.
Calculate Fuding Needs
Startup cost summary
This table summarizes brewery startup CAPEX and excluded launch cash needs using researched model assumptions for equipment, build-out, and operating runway.
Highlighted CAPEX$495,000Base planning example
Excluded cash needs$715,000Outside CAPEX total
Funding need$1,210,000CAPEX + excluded cash needs
Cost Category
Base Estimate
Main Cost Driver
CAPEX Calculator
10 BBL Brewhouse System
$150,000
Brew system size, install, and commissioning
Yes
Canning Line
$120,000
Packaging line capacity and automation level
Yes
Taproom Build-out and Furnishings
$100,000
Construction scope, finishes, and seating
Yes
Fermentation Tanks
$80,000
Tank count, size, and fabrication spec
Yes
Delivery Vehicle
$45,000
Vehicle type and upfit for local distribution
Yes
Working Capital and Operating Reserve
$715,000
Ramp-up losses, fixed overhead, and Year 1 wage base through breakeven
Startup cost swings here come from equipment, taproom build-out, and whether canning and distribution start on day one. Lean cuts packaging CAPEX; base matches the $620,000 model; full adds storage, tanks, and working capital.
Lean, base, and full launch cost bands
Scenario
Lean LaunchNeighborhood taproom
Base LaunchBalanced craft brewery
Full LaunchProduction-plus-packaging
Launch model
Taproom-focused launch with delayed canning and a smaller packaging spend.
Full model launch with brewing, taproom sales, canning, keg supply, and delivery.
Production-heavy launch with more tanks, larger cold storage, and a stronger distribution setup.
Typical setup
Use the brewhouse and taproom first, then add canning and delivery later.
Matches the source model with the 10 BBL brewhouse, taproom, canning line, lab equipment, and delivery vehicle.
Build for higher throughput, more finished-goods storage, and wider outbound volume.
Cost drivers
10 BBL brewhouse
taproom build-out
keg fleet
lab gear
delayed canning line
10 BBL brewhouse
taproom build-out
canning line
delivery vehicle
working capital
More tanks
cold storage
distribution setup
higher working capital
canning line
Planning rangeCAPEX only
$450,000 - $525,000Lower CAPEX
$620,000 - $715,000Model base case
$750,000 - $900,000Higher funding
Best fit
Best for founders testing local demand and keeping the first cash burn tight.
Best fit for founders who want the core model and can carry the Month 14 breakeven timeline.
Best for teams pushing packaged volume and able to fund a bigger cash gap.
!
Planning note: These scenario ranges are researched planning assumptions, not exact quotes. Use them to compare launch scope, cash need, and timing.
How much does brewery equipment cost?
A Brewery with the listed setup costs about $465,000 in equipment before buildout. That total comes from a $150,000 10 BBL brewhouse, $80,000 in fermentation tanks, $40,000 in brite tanks, $35,000 glycol chiller, $25,000 keg fleet, $120,000 canning line, and $15,000 laboratory gear. Keep plumbing, electrical, drains, boiler, ventilation, and wastewater in the buildout budget, not equipment.
Cost drivers
Batch size moves brewhouse cost.
Tank count lifts cellar spend.
Automation adds controls and pumps.
New versus used changes capex fast.
Separate from buildout
Plumbing is buildout, not equipment.
Electrical is buildout, not equipment.
Drains and wastewater are buildout.
Packaging choice changes total spend.
How much money do you need to open a brewery?
A Brewery needs about $715,000 in total funding, not just the $620,000 capital expense budget. That cash need peaks around Month 13, with Month 14 breakeven and a 41-month payback as key runway markers; What Is The Most Important Factor Driving Growth For Your Brewery? ties that runway back to growth drivers.
Funding Need
$620,000 planned CAPEX
$715,000 minimum modeled cash need
Month 13 peak funding pressure
Month 14 modeled breakeven
Setup Choices
Taproom buildout: $100,000
Point-of-sale hardware: $10,000
Production model adds packaging load
Brewpub can delay canning CAPEX
What are the hidden costs of starting a brewery?
The hidden cost is that Brewery’s bill doesn’t stop at construction; rent during buildout, permits, inspections, and setup work can push funding from $620,000 toward a $715,000 cash need. For the revenue side, see How Much Does The Owner Of A Brewery Typically Make?; the real squeeze is before opening, when delays in federal brewer approval, state alcohol permits, zoning, health, and fire checks keep cash burning. On top of that, monthly overhead is already $19,250 before payroll, and Year 1 payroll adds $165,000.
Pre-open costs
Rent runs during buildout
Federal brewer approval can delay launch
State alcohol permits slow opening
Zoning and inspections add time and fees
Cash drain
$14,800 fixed expenses per month
$1,200 insurance per month
$500 licenses and permits per month
$750 professional services plus $2,000 marketing
Startup extras
Pilot batches use cash before sales
Ingredients and keg deposits tie up money
Payment processing and distribution take fees
Legal setup and accounting add more spend
Funding gap
$19,250 monthly overhead before payroll
$165,000 Year 1 payroll cost
Excluded costs can exceed CAPEX
Cash reserve matters before first sales
Key Takeaways
Equipment alone starts near $345,000 before install.
Buildout and code work can exceed equipment quotes.
Packaging adds $120,000 plus ongoing unit-level costs.
Licensing delays can burn $14,800 monthly prepayroll.
Brewery Core Five Startup Costs
Brewery Equipment Startup Expense
Core brewing gear
A 10 BBL brewhouse at $150,000 is the anchor cost, but the real plant budget also needs $80,000 for fermentation tanks, $40,000 for brite tanks, $35,000 for a glycol chiller, $25,000 for a keg fleet, and $15,000 for lab gear. That totals $345,000 before controls, pumps, cleaning-in-place, and cellar parts.
What drives the quote
Year 1 output is set at 600 units across Golden Ale, West Coast IPA, Hazy IPA, Coffee Stout, and Seasonal Sour. The right size depends on batch size, tank turns, fermentation days, and how much automation you buy. Used equipment can save cash, but install quotes, repair risk, and missing parts can erase the discount fast.
Ask for installed pricing.
Match tanks to fermentation days.
Keep spare capacity for growth.
How to save
Cut cost by buying only the gear needed for the first 600 units, not the dream layout. Get three install quotes, separate controls from tanks, and price used gear only if parts, warranties, and startup help are clear. The mistake is overbuying cellar space early; the better move is to preserve room for Year 2 without tying up cash in idle steel.
Compare new versus used quotes.
Price installation separately.
Delay noncritical automation.
Year 2 headroom
Build for 1,000 units only if the first layout leaves spare fermenter turns, chilled capacity, and cellar space. If Year 1 product mix stays split across five beers, the pressure point is usually tank time, not the brewhouse itself. A small buffer here is worth more than oversized taproom spend or extra packaging gear.
Brewery Buildout Startup Expense
What It Covers
Brewery buildout covers the space itself: drains, sealed floors, water, gas, steam or boiler needs, electrical capacity, ventilation, wastewater handling, fire code, health code, and local inspections. The source model includes $100,000 for taproom buildout and furnishings, but utility upgrades can sit outside equipment quotes.
How To Estimate
Start with landlord delivery condition, then add tenant improvement allowance, city rules, floor slope, trench drains, ceiling height, loading access, and prior food or beverage use. Here’s the quick math: quote each scope line separately, then total them. Keep landlord work, tenant improvements, and code compliance apart from brewhouse CAPEX.
Get utility upgrade quotes first.
Check fire and health rules early.
Confirm loading access before signing.
How To Control Cost
Use a space with existing beverage use, if you can, because that can cut down on drain, floor, and utility work. Don’t bundle this into tank pricing or brewhouse quotes. The best savings come from clear scope, clean bids, and not paying twice for the same code item.
Match the space to the process.
Price code work before lease signing.
Avoid vague “turnkey” assumptions.
What Usually Moves The Budget
Floor slope, trench drains, and utility capacity usually drive the bill more than décor. If the site already has the right slope, ceiling height, and service hookups, the buildout gets simpler fast. If not, the landlord, municipality, and inspectors can add time and cost before the first tank is installed.
Brewery Taproom Startup Expense
Taproom Buildout
Taproom buildout usually sits around $100,000 for furnishings, plus $10,000 for POS hardware. Budget for the bar, draft system, seating, glassware, signage, restrooms, music, TVs, menu boards, customer flow, ADA access, and front-of-house storage. Size it from seat count, service model, and local occupancy rules.
Lean Layout
Keep the spend tight by matching the room to the menu and hours. A low-food taproom needs less equipment than a food-led room, but code still drives restrooms, exits, and access work. Get landlord scope, tenant-improvement allowance, and utility quotes first, then buy used furniture only where wear and safety are acceptable.
Operating Load
Open a taproom only if the extra load fits the model: $7,500 monthly rent, $55,000 taproom manager salary, and $35,000 Year 1 taproom staff salary. That is $180,000 before benefits and taxes. A production-only brewery may skip most of this, so seats, outdoor space, food service choice, and hours drive the choice.
Seat Count
The fastest way to size this cost is by seats, service style, and layout. More seats raise furniture, restrooms, and POS needs, while table service and food service add labor and code pressure. Outdoor space can ease indoor crowding, but local occupancy rules still set the ceiling.
Licensing And Compliance Startup Expense
Permit stack
Federal brewer approval from the Alcohol and Tobacco Tax and Trade Bureau, state alcohol permits, local zoning, health and fire inspections, label compliance, sales tax setup, and employment setup all sit ahead of opening. This is not equipment spend. It is a gate that can stop revenue if any step slips.
Monthly carry
Use months of coverage × monthly spend to budget this line. The source model carries $500 per month for licenses and permits, $750 for professional services, and $1,200 for insurance, or $2,450 monthly before rent and payroll. Add filing fees, legal setup, and accounting time separately.
Count permit months
Price attorney review
Confirm policy terms
Delay risk
Permitting delays should sit in pre-opening cost, not equipment. If zoning, inspections, or label sign-off slip, the burn is $14,800 a month in fixed costs before payroll, or $28,550 a month with Year 1 base payroll included. One clean plan: start filings early and keep lease, site, and permit dates aligned.
Order of work
Do the legal setup, tax registration, insurance binders, and label review before you spend on launch stock. Then book zoning, health, and fire checks in the right order so rework does not pile up. If a space lacks prior beverage use, expect more review time and more pre-opening cash tied up.
Packaging And Cold Storage Startup Expense
Packaging CAPEX
If you’re packing beer for market, split one-time gear from per-unit spend. The fixed stack includes a $120,000 canning line, $25,000 keg fleet, keg washer/filler, label and date coding, cold room, finished-goods storage, and distribution readiness. Tie the quote to batch size, tank turns, install, and spare capacity for 600 Year 1 units and 1,000 in Year 2.
Unit Costs
Do not bury cans, labels, cartons, or distributor fees inside CAPEX. Year 1 packaging per unit is $34 for Golden Ale, $38 for West Coast IPA, $42 for Hazy IPA, $45 for Coffee Stout, and $50 for Seasonal Sour. Add 20% wholesale distribution fees and 28% payment processing fees to see cash need per sale.
$34 Golden Ale
$38 West Coast IPA
$42 Hazy IPA
$45 Coffee Stout
$50 Seasonal Sour
Canning Choice
If volume is uncertain, use mobile canning first and keep the $120,000 line out of early CAPEX. Buy in-house only when batch count, cold storage use, and keg turnaround justify the fixed cost. Get quotes for the keg washer or filler, because throughput and cleanup time change labor and downtime more than buyers expect.
Cold Chain
Cold room size should follow packaged volume, not taproom wishful thinking. Price the room, finished-goods racks, and loading access together, then stress test it against label print speed, date coding, and distributor pickup cadence so beer does not sit warm while orders wait.
